ecigbestsave.com

Many electronic cigarette veterans love the ego K passthrough due to their great designs and the huge advantage over regular smaller ecig batteries. It works with a stable 4.2v for hours of non stop vaping and you can use it while charging when plugged into a computer USB port, universal AC/USB adapter or the Car duel USB power adapter. It also works as a regular 1100mah battery when the cord is removed when it's convenient for you.

The eGo K passthrough button has a 5-click On/Off lock. Please press the button 5 clicks within 2 seconds to activate the battery. Each passthrough comes with a 47.24" (1200mm) stretchable USB cord.

How to use:
Step 1: UnScrew the bottom cap
Step 2: Insert the USB cord into the bottom of the passthrough and connect to a USB port on computer or AC/USB Adapter.
Alternative Option: Detach the USB port and use as a battery when fully charged.

How to use the retractable USB cord:
You can extend the USB cord at any length you want. When the cord reaches the maximum length, pull gently again and it will retract back automatically.

How to charge:
Step 1: Connect USB cord to battery (Can use while charging).
Step 2: Plug USB cord  ino a powered USB port on a computer or an AC-USB adapter or Car-USB adapter. Note: Charging time: 2 hours

Note: The eGo Q and eGo-K Batteries have a stretchable center contact pin that may require adjustment if not making contact with your atomizer, cartomizer or clearomizer.
Too adjust:
1) Remove atomizer, cartomizer or clearomizer from battery.
2) Use small tweezers to pull center contact pin up slightly using caution not to over extend the pin.
3) Screw atomizer, cartomizer or clearomizer back on battery and use.

Alternative Option: You can also charge with a eGo-K USB charger or equivalent charger. Can not use while charging when charging by this method.

Not a Joyetech product.

Unit:1pc
Capacity:1100mAh
Passthrough Length: 4.33" (110mm)
Stretchable cord length: 47.24" (1200mm) Max
Threading:510/eGo
Output Voltage:3.0-4.2v
Package:Simple