Nextag Seller

Visit ecigbestsave.com on ShopMania

Subscribe to me on YouTube

Follow ecigbestsave on Twitter

Ecig Best Save is an Upfront Merchant on TheFind. Click for info.

  > New Items

30W Eleaf iStick Simple
30W Eleaf iStick Simple with OLED Screen MOD Battery
30W Eleaf iStick Simple

Share |
30W Eleaf iStick or iStick box MOD simple pack has a fashionable metallic appearance. With a compact size, you can hold that in the palm, much more convenient for usage and portability. Four bright colors with powerful functions. The highlight is the incremental OLED screen.

1. Variable wattage: wattage can be adjusted from 5W to 30W
2. Variable voltage: voltage can be adjusted from 3.3V to 8V
3. Built-in battery with a capacity of 2200mAh
4. Atomizer ohm capability: support as low as 0.4ohm
5. OLED screen, which shows the battery level, atomizer resistance, wattage & voltage
6. Battery protections: atomizer short circuit protection, over 10 second protection and low voltage protection (battery lower than 3.3V)
7. Micro USB rechargeable: can be charged with a 1Amp wall adaptor, which is faster
8. 510 threading

Switch the VV/VW mode: Press the square button for three times to switch the VV/VW mode when the battery is turned on. In VV mode, you can adjust output voltage between 2.0V-8.0V. In VW mode, you can adjust output wattage between 5W-30W

Adjust the voltage/wattage: Press the up-and-down arrow buttons to increase or decrease the voltage/wattage. Keep pressing the up/down arrow button, voltage/wattage will increase or decrease slowly at first, then they will increase/decrease at a constant high speed. The number will stop increasing/decreasing when you loosen the up/down arrow button.

Lock and Unlock: Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is on, then they will be locked and the screen will reflect “Lock”. Still keep pressing simultaneously for 2 seconds to unlock them and the screen will reflect “Unlock”. Through these operations, you can protect the buttons from unintentional presses and prolong their service life.

Switch the display mode: Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is off, the screen display will rotate 180 degrees. You can view the screen from two kinds of angle through this operation.

How to charge: iStick 30W is charged through USB port at the bottom of battery. It will take 2.5 hours to fully charge the battery via 1A wall adaptor.
The battery level indicator on the OLED screen will keep flashing during charging. When fully charged, the indicator will stop flashing and keep shining for 15 seconds then go out.

The USB cable in the kit is a universal micro charging cable. It can be used on iStick 10W/20W/30W/50W.

Brand: iSmoka/Eleaf
Unit: 1set
Size: L 1.25" W .78" H 3"
Material: Aluminium
Color: Black/Silver/Blue/Red
Style: US plug
Capacity: 2200mAh
Threading: 510
Package: Gift box

Each Set Contains:
1pc iSmoka Eleaf iStick 30W MOD Battery
1pc 510 to eGo adaptor
1pc Micro USB charging cable
1pc Manual

Warranty:30 days for battery. Only accept DOA for all other parts.

Best Matches: Aspire Atlantis with Sub ohm Glass Clearomizer, Kanger Subtank, Kangertech Subtank Nano Cartomizer and Kangertech Subtank Mini Cartomizer.

Item# Item Name Starting at Qty Add
ismoka-eleaf-30-simple-0003 30W Eleaf iStick Simple - Black
ismoka-eleaf-30-simple-0001 30W Eleaf iStick Simple - Red
ismoka-eleaf-30-simple-0002 30W Eleaf iStick Simple - Silver
Check the items you wish to purchase, then click

Average Customer Review: Average Customer Review: 4 of 5 4 of 5 Total Reviews: 1 Write a review.

  0 of 2 people found the following review helpful:
4 of 5 30W iStick December 30, 2016
Reviewer: Yancey Sexton from Mohave Valley, AZ United States  
Purchased for friend

Was this review helpful to you?

Browse for more products in the same category as this item:

New Items

Mods - APV & Variable Voltage
Batteries > Mods
Mods - APV & Variable Voltage > Mod Kits